How accurate are NDB's?
How accurate are NDB's?
NDB’s are stations emitting a signal. There is nothing for them to be accurate about. ADF's on the other hand, when tuned to an NDB need to be accurate within +/- 5 degrees.
What is a VOR? What frequency range and band is it in?
What is a VOR? What frequency range and band is it in?
VHF Omnidirectional Radio Range (VOR) is defined as VHF Omnidirectional Radio Range, an aircraft navigation system operating in the VHF band.
VOR's are assigned radio channels between 108.0 MHz and 117.95 MHz (with 50 kHz spacing); this is in the very high frequency (VHF) range.
What is an MCP and what is an FMA?
What is an MCP and what is an FMA?
The mode control panel is used to select the autothrottle, autopilot, and flight director operating modes. The flight mode annunciator displays current flight modes.
What produces the maximum glide range?
What produces the maximum glide range?
Flying at Vmd. At this speed the aircraft is flying at the maximum ratio of Lift and Drag, maximizing the potential energy consumption in terms of distance travelled.
Because usually the heated air bypasses the air filter, therefore it is possible for dust to enter the engine and so exposing the engine to unnecessary engine wear.
What is the coefficient of Lift?
What is the coefficient of Lift?
An adymensional number relating the lift with the dynamic pressure of the incoming flow. It is dependent on the form of the object and the angle of attack.
What is lift?
What is lift?
Lift is the component of the total aerodynamic force perpendicular to the relative airflow.
Lift is generated when a streamlined body, such as an aerofoil, is placed in a flow of air.
Tell me, I was looking out the window and I saw white strokes coming out of the engines at cruising level, but I didn’t see it from an aircraft taking off, why is that and what is the difference?
Tell me, I was looking out the window and I saw white strokes coming out of the engines at cruising level, but I didn’t see it from an aircraft taking off, why is that and what is the difference?
Those are contrails.
The jet engine exhaust gases consist of carbon dioxide and water vapour.
At high altitudes the wator vapour gets released in a very cold environment. This can cause the air to be saturated with water vapour and then condenses. If cold enough the condense can freeze into white droplets. This forms the contrails.
How would you explain to your neighbour what the difference is between a precision and a non-precision approach?
How would you explain to your neighbour what the difference is between a precision and a non-precision approach?
A precision approach uses both lateral (from left to right) and vertical guidance. A non-precision approach only uses lateral guidance.
During what phase of flight is lift the greatest?
During what phase of flight is lift the greatest?
For a commerical aeroplane: During take off. At this point the aircraft has it it's maximum weight, and accelerating in the vertical plane requiring the highest ammount of lift to counteract the weight.